Announcement
Collapse
No announcement yet.
24V AWD Swap Knowledge Base
Collapse
This is a sticky topic.
X
X
-
Originally posted by The Dark Side of Will View PostLol...
It's one of the things that defines where the engine ends up; I figured I should have it on my crossmember.E30 325ix M50 turbo 7 spd DCT 4wd 840awhp @ 31 psi.
E30 M50 6 spd 764whp @ 24psi.
E30 M20 6 spd 675whp.
Comment
-
AAAAAAAND of course I realize basically as soon as I post the above image that I need to change it before the rack or mount towers will actually bolt up.
The rack mount holes are too far from the rear edge. I'm going to have to lower them and then add spacers.
Because of the way they're contoured, the mount towers won't sit flat on their intended locations, so I'll have to lower those and add spacers.
But since all the required parts except the spacers are already digitally built that shouldn't be too hard.
Comment
Comment