My dream iX ^_^ turbo DD to come

[6A LDY]

Sorry if theres an obvious answer to this, but what have you done so far in terms of the steering?

[Bimmer_man]

I just hooked it up wasnt fun to do had to seperate the subframe to get it installed.

[Bimmer_man]

Oh my whats this



Oh its a hartge spoiler



needs some repair work



thats on both sides. not sure how to repair it but ill figure it out or if any of you know let me know.

[e30m3s54turbo]

You must have the Hartge love?

[Bimmer_man]

Oh yeah I love Hartge. Out of Hartge, Alpina, AC Schnitzer and any other e30 tuners, I prefer Hartge. I just got to fix the spoiler. The studs missing there seems to be a common issue on these is that correct.

[e30m3s54turbo]

I was under the impression the Hartge wing was bolts it used.

[Bimmer_man]

dose it have a bolt that bots to it on the under side from thr trunk up and the stud on the wing that has a nut? or what im not understanding what you mean raul ?

[e30m3s54turbo]

On my euro Hartge H26 it had bolts on wing. E30 m3 on wings have studs coming out of wing.

[Bimmer_man]

with this two studs are sticking out of the wing and on the rear there are holes. Now that i think about it i havent looked in the holes to see if there are threads.

[e30m3s54turbo]

After thinking about it you are probably right about studs. I really never checked into it. I will look into to it.

[Bimmer_man]

oh okay il let you know what i see. would be cool if there are threads in it then i can just drill holes and install.

[Bimmer_man]

So I finally supplied the car with power and on board computer works perfect apart from the back light now working but it works no bleeding at all. And the car has a half tank of fuel Haha sweet.

[Bimmer_man]

I got my new crankshaft today and I love it it has perfect journals. I'll take pics soon.

[Bimmer_man]

Here are the pics as promised

The crank as i got it


The crank out of the plastic



the two cranks sie by side the top is the 2.5 the bottom the 3.0



this is one clue that i think its already been to a machine shop



my other clue is as i stated the journals are smoother than a babies bottom

and i installed the actual bumper piece for when the car gets on the road i can at least drive it legally



also i need to clean this up so i can get the bumper bracket



if you know the part number of the bumper bracket that goes there let me know

awesome pic of the M20 without the rotating assembly looks pretty bad ass imo



inside of the intake manifold pretty clean



Correct me if im wrong but was my block cast 07/19/1988?

[litu]

Awesome project :)