Announcement

Collapse
No announcement yet.

10mm spacers?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    10mm spacers?

    For you guys that are running spacers, Can I run 10mm spacers in the rear without any issues? I have stock ix weaves et41.. thanks

    Sent from my Samsung Note 3
    '91 318i (Alpine) - daily
    '88 325ix (Zinno) - drive here and there!

    #2
    Yes. Won't be any issues.
    You can even run a 20mm if you want with no issues. I ran 25mm on iX weaves.
    » PARTS FOR SALE
    » TRANSACTION FEEDBACK

    Comment


      #3
      Originally posted by Blackout View Post
      Yes. Won't be any issues.
      You can even run a 20mm if you want with no issues.
      Thanks, I didn't know if I was going to have issues with rubbing or anything like that..anyone else running anything bigger then 10mm?

      Sent from my Samsung Note 3
      '91 318i (Alpine) - daily
      '88 325ix (Zinno) - drive here and there!

      Comment


        #4
        Im running 13mm. You don't really want to go lower than effectively ET25, i think 20 or 25mm are too much.
        Build thread

        Bimmerlabs

        Comment


          #5
          Originally posted by nando View Post
          Im running 13mm. You don't really want to go lower than effectively ET25, i think 20 or 25mm are too much.
          You running anything in the front?

          Sent from my Samsung Note 3
          '91 318i (Alpine) - daily
          '88 325ix (Zinno) - drive here and there!

          Comment


            #6
            On Lola I run 15mm spacers in the rear with my ET25 RDs, and 20mm spacers back there with the ET30 Type Cs. Rear fenders are rolled. I run spacers in the front which are 5mm smaller respectively; the actual size depends on which wheels.
            Originally posted by kronus
            would be in depending on tip slant and tube size

            Comment


              #7
              Originally posted by agent View Post
              On Lola I run 15mm spacers in the rear with my ET25 RDs, and 20mm spacers back there with the ET30 Type Cs. Rear fenders are rolled. I run spacers in the front which are 5mm smaller respectively; the actual size depends on which wheels.
              I'm running stock ix wheels...I want to run spacers without rolling my fenders..I guess 13mm would be good without rolling my fenders?

              Sent from my Samsung Note 3
              '91 318i (Alpine) - daily
              '88 325ix (Zinno) - drive here and there!

              Comment


                #8
                depending on what you decide i have some 10mm spacers that i am needing to sell. pm me if you're interested!

                1989 Coupe build thread: http://www.r3vlimited.com/board/showthread.php?t=312012
                IG: @mitchlikesbikes

                Comment


                  #9
                  I run 13mm on all 4 corners
                  Build thread

                  Bimmerlabs

                  Comment


                    #10
                    Originally posted by nando View Post
                    I run 13mm on all 4 corners
                    You mind sharing where you got these 13mm from? Or you can PM me if you like..thanks

                    Sent from my Samsung Note 3
                    '91 318i (Alpine) - daily
                    '88 325ix (Zinno) - drive here and there!

                    Comment


                      #11
                      They are the 42 draft designs spacers sold on this forum
                      Build thread

                      Bimmerlabs

                      Comment


                        #12
                        I run 10mm spacers w/ my winter setup @ ET35....so yeah you won't have an issue at all.
                        www.instagram.com/snwmble
                        #snwmble

                        Current:
                        '05 BMW M3 - Silver Grey/Imola Red
                        '90 BMW 325iX - Sterling Silver/Houndstooth sport(5-speed converted)
                        '15 Mini Countryman - Blazing Red/Carbon Black

                        Past:
                        '01 Audi Allroad - Light Silver/Platinum Saber Black
                        '88 BMW 325iX - Diamond Schwarz/Silver sport *Sold*
                        '01.5 1.8TQ - Brilliant Black/Nogaro Alcantara ...after 8.5yrs, *Sold* =(
                        '90 BMW 325i - Schwarz/Tan sport *Sold*
                        '89 BMW 325ix - Diamond Schwarz/Black sport *Sold*

                        Comment


                          #13
                          Originally posted by audiquattrot View Post
                          I run 10mm spacers w/ my winter setup @ ET35....so yeah you won't have an issue at all.
                          Et35 + 10mm spacers?

                          Sent from my Samsung Note 3
                          '91 318i (Alpine) - daily
                          '88 325ix (Zinno) - drive here and there!

                          Comment


                            #14
                            yup...no rubbing issues. You will be fine
                            www.instagram.com/snwmble
                            #snwmble

                            Current:
                            '05 BMW M3 - Silver Grey/Imola Red
                            '90 BMW 325iX - Sterling Silver/Houndstooth sport(5-speed converted)
                            '15 Mini Countryman - Blazing Red/Carbon Black

                            Past:
                            '01 Audi Allroad - Light Silver/Platinum Saber Black
                            '88 BMW 325iX - Diamond Schwarz/Silver sport *Sold*
                            '01.5 1.8TQ - Brilliant Black/Nogaro Alcantara ...after 8.5yrs, *Sold* =(
                            '90 BMW 325i - Schwarz/Tan sport *Sold*
                            '89 BMW 325ix - Diamond Schwarz/Black sport *Sold*

                            Comment

                            Working...
                            X