New tank

[Hares1370]

I've just pick up a new fuel tank. It has a hard line that runs into the tank while the old one doesn't. I'm just trying to see where all there lines need to go. I feel like one of these lines does have a place to connect. http://bavarianretro.com/img/p/3/6/8...ox_default.jpg

This is a stock photo of the new tank

http://www.niparts.com/OEM/25CE15/BMW/16111180175.html

[The Dark Side of Will]

http://realfierotech.com/phpBB/viewtopic.php?p=147083#p147083

[Hares1370]

Thanks

[The Dark Side of Will]

There are two styles of tank... the older 55(?) liter and the newer 63(?) liter. Are you trying to replace a 55 with a 63? That may explain why the new and old are different.

The old tank has a transfer connection UNDER the driveshaft, which has to be disconnected to remove the driveshaft. The newer tank does not have that connection.

I thought all the 325iX's that came to the US had the newer tank.

[Andy.B]

The old tank has a transfer connection UNDER the driveshaft, which has to be disconnected to remove the driveshaft.

Not a big deal for the discussion at hand, but that is not accurate. You can remove the drive shaft with the fuel tank crossover pipe in place just fine.

[The Dark Side of Will]

Ok... I've never seen one so I wasn't going on first hand info.