Need part # verification on this vacuum hose
Collapse
X
-
yeah, it's part #4. it comes in lengths that you cut to size. I replaced mine a few years ago. -
update, the correct part # was 34331115926 which is a meter of vacuum hose, which I cut to length.
It covers both #4 hoses in the realoem diagram, as well as #3 fyi
http://www.ecstuning.com/Search/Site...15926/ES61650/
it fixed the hard start, and loss of power on the top end. Easy fix!Leave a comment:
-
Not exactly clear on what you are looking for. Do you need the plastic "Y" connector or the hose underneath it? If it is the hose, you need to just buy the "bulk" hose (#4) and cut to the length needed.Leave a comment:
-
-
Is the hose you received #5 instead of #3?
Could the part numbers for the callouts be reversed on RealOEM?Leave a comment:
-
i'm not sure if the diagram is even correct, b/c #3 appears to have a kink in it....mine doesn't....Leave a comment:
-
Need part # verification on this vacuum hose
I looked up on realoem for this hose (which appears to be #3) based on the diagram. Its basically a straight looking hose that goes from the intake manifold to this valve.

Can anyone tell me what the correct part # is? Realoem is saying 34331153977....but I ordered it and its an elbow hose. not the right one.
Picture circled is the hose I'm trying to replace.


this is the wrong part, which realoem said was correct?
Tags: None

Leave a comment: