Rial Milano wheels 16x6.5 + 40 mm offset

[95BMWIC]

Ok

Im researching this wheel and I believe I can make these work on an IX with only a set of hubcentric rings.

I wanted to post it just to make sure.

Rial Milano wheels 16x6.5 +40mm offset - came off a mini cooper supposedly.

will these work?

[95BMWIC]

So - discovering this thread - I may have made a mistake - 56.1 Mini cooper vs 57.1 BMW.. http://www.r3vlimited.com/board/showthread.php?t=233160

not quite sure this will work without machining..

[95BMWIC]

Owner states that he has a hub centric ring in it - for a mini and that they were an aftermarket purchase - states hub ring is 63.3 to 56.1 ..

So I am assuming the ET of 40 is safe..? and that I can order a centering ring of 63.3 to 57.1?

to work on an IX..?

[6A LDY]

yeah, et40 is plenty high enough (stock is 41), and you should be able to find the hubcentric rings no problem, I went with aluminum rings for mine but plastic is ok too. If you run 5mm spacers it will put the rim in almost the exact position as stock

[nando]

doesn't seem worth it to me for a 6.5" wide wheel, unless you're going to run 195s.

[6A LDY]

doesn't seem worth it to me for a 6.5" wide wheel, unless you're going to run 195s.

It would be great for a winter wheel though