Announcement

Collapse
No announcement yet.

Front Tire Wear Problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Front Tire Wear Problem

    I was wondering if anyone could help me out with a front inner tire wear problem. I have billys and H&Rs and have recently (~10000) replaced all front suspension parts (tire rods, control arms/bushings, wheel bearings etc) I got the car aligned, here is a picture of the specs sheet.



    After the alignment and new tires (~2000miles) I am still noticing a fairly significant wear pattern on the inners of both my front tires. The only thing i can think of is my shock tower bushings, as they have large cracks (not sure if this could cause that type of wear). Any advice would be greatly appreciated!

    Thanks!

    #2
    Is this not normal?
    AWD > RWD

    Comment


      #3
      I was afraid of that answer hahaha, but I have heard that 2.5 degrees of negative camber should be a fairly even wear pattern...

      Comment


        #4
        What you have are 4 wheel chicken strips.

        If you were driving that car like you're supposed to, then you'd have worn the outer edges to match the inner edges. :p

        Originally posted by Addison325ix View Post
        I was afraid of that answer hahaha, but I have heard that 2.5 degrees of negative camber should be a fairly even wear pattern...
        Whoever told you that drives like he's supposed to ;)

        Comment


          #5
          Originally posted by Addison325ix View Post
          I was afraid of that answer hahaha, but I have heard that 2.5 degrees of negative camber should be a fairly even wear pattern...
          All joking aside, if you have -2.5 camber and drive straight all the time, you'll wear the inner edges of your tires.

          Comment

          Working...
          X