VHT nightshade tails

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • TheB1G Lebowski
    replied
    Originally posted by e30=sexy
    me and my bf both used vht on our taillights... it turned out really good and didnt even wet sand. he did his completly which looks good..and i taped off my reverse lights which look even better in my opinion.
    Hell yeah i thought about that too. I would like to strip the reverse off and tape the rest off a use one really light spray, it had a more smoked look when i first did them. But a lesson learned when you use this stuff if dries darker than the last coat you put on.

    Wow maximunangle you have had some wild cars, a turbo dodge van!?!??? Thats awesome.

    Leave a comment:


  • maximumangle
    replied
    ^^lolz
    e30=sexy did you ever get that engine problem taken care of?

    Leave a comment:


  • e30=sexy
    replied
    me and my bf both used vht on our taillights... it turned out really good and didnt even wet sand. he did his completly which looks good..and i taped off my reverse lights which look even better in my opinion.

    Leave a comment:


  • maximumangle
    replied
    i did the turns and tails on my SC a while back with VHT, turned out great. you can tint tails pretty dark and it still comes out quite visible at night. ive never had any trouble with police in the year ive had them this dark. you have to watch how close/far you spray with it though. the difference in difference will give you either a matte or a gloss spray.

    Leave a comment:


  • cabin
    replied
    Looks like you did a pretty good job. Now you just need a plate filler to tie it all in.

    Leave a comment:


  • everlast
    replied
    Ok.

    Leave a comment:


  • TheB1G Lebowski
    replied
    Originally posted by everlast
    Good idea.
    Very thin layer, thank you very much. Is still very visible at night, still bright.

    Leave a comment:


  • everlast
    replied
    Originally posted by TheB1G Lebowski
    I did my headlights
    Good idea.

    Leave a comment:


  • TheB1G Lebowski
    replied
    Na mine came out smooth and clean. All i did to prep was wash with warm water, soap, dry then i cleaned with rubbing alcohol. I havent used testers tint spray before, it could just be that. I got the VHT at Oreillys, was like 13 bucks but has gone along way. I did my headlights and all turn and side markers. I also did mine outside and the wind was blowing but turned out great. im pleased.

    Leave a comment:


  • gtdragon980
    replied
    did your paint job come out bumpy? i did mine and wetsanded the hell out of them and still came out somewhat bumpy..i used testors tint spray and clear coat..it looks good from afar but up close you can see flaws

    Leave a comment:


  • TheB1G Lebowski
    started a topic VHT nightshade tails

    VHT nightshade tails

    Just did my tails with VHT nightshade, im liking the overall appearance of the car. Oh and got my e30 badges from NOMAD and they are great.


Working...