Hartge Wing too long for trunk

[Farbin Kaiber]

I had a knockoff wing with the holes at the very edge of the trunk, and it overlapped onto the rear quarter. could this be the case?

[Beastolizer]

10 mm socket to get the plastic nuts off.

and it sounds like you might have bought the wing off another BMW, not an e30.

weird... the 10 mm socket wasn't doing anything and I could only fit the piece through the 2 large holes on the 2 corners.

That's what I'm thinking. The seller said nothing about it not fitting an e30. Good thing he was local!

[bimmerpirate]

10 mm socket to get the plastic nuts off.

and it sounds like you might have bought the wing off another BMW, not an e30.

[Beastolizer]

So I just bought a Hartge rear wing and its 2.5" too long. I measured the length of my trunk and it came out to 51 inches, while the wing was roughly 53.5 inches.

I'm thinking my only 2 options are sell the wing or figure a way to cut out 2.5 inches of the middle of the wing and reattach it. Let me hear some input on what the best route to take would be

And while im at it, how the fuck do you get the trunk spoiler off? There's like hexagonal plastic pieces holding the bolts down or whatever, I can't figure what tool to use that will fit the holes...

-Parker