Can I still roll?

[GunMetalGrey]

I found out my tires rub, they also pulled the inner lip down and bent the fender a bit, If I get a fender roller and heat the metal up real nice will I have any issues trying to reform the fender? I need it pulled a bit as well, but that seems like it would work. Just wondering if it would work well.
Cliffs: Bent fenders
Need fenders pulled and rolled
Will it work?

[dark325]

What are your wheel specs? How low are you?

My vert has race springs and 16x9's 15et.. Rolled and pulled my fenders. All better

[GunMetalGrey]

et20 I think, 205, coilovers so I can play with height a bit, but I like it where it is. I dont need to pull much, just enough to clear. Just wondering if I f'ed up the fenders too much

[dark325]

Even heating up my paint, it still cracked here and there.. But I was getting a bit aggressive with the roller. Go slow, take your time. Good luck :)

[einstein57]

If you do it right it won't crack unless its crappy paint or poor prep work. I've re shaped fender that got caught on the front tires and pulled out a half inch in the wrong direction. Just takes patience and a lot of heat. Almost to the point of boiling up the paint.