late model car-->switching to plastic bumpers, what do i need?

[geoffp]

so i have a 1988 325 sedan, it has diving boasrds on it now, but i picked up some plastic bumpers for it. what parts are needed for the swap?? i only purchased the bumpers alone, no hardware.



thanks in advance!!

**just realized i already posted this a couple months ago, no need to respond to this**

[Dave]

http://www.r3vlimited.com/Tech/bumper1.htm

[Teaguer]

You'll need :

Front & rear bumper shocks - total 4
Front & rear bumper attachment bolts - total 4 - these bolt up through the bumper into the shocks
Front & rear side slide brackets - total 4

You will be better off buying them used or from a junkyard as last time I checked the shocks were around $70 or so per .

You'll also have to plug the holes in the rear body where the d-board trim was bolted in .

Then theres the side marker lights and turn signals too .

[Teaguer]

http://www.r3vlimited.com/Tech/bumper1.htm

Thsat actually not that helpful considering he has a late model already .