Ok I searched and didn't find much but does anyone know where # 12 and #11 go?
-
"It's like a koala bear crapped a rainbow in my brain."
R.I.P. Harry Goz aka. Captain Murphy
"My ride, My ride, she don't beg, steal, cheat, or lie,
My ride, My ride, and our relationship is classified." -
some1 who has installed these before chime in and help this ass-clown get his IS skirts on!!IG: @Baye30
FRONT VALENCE IS ZENDER!!! STOP FILLING MY PM BOX PPL!!! -
They go on the pinch weld. its what holds the bottom of the skirt back tight.
Comment
-
I only used #9 the bottom clips. I didn't want to drill holes in the rocker so I used 3m double stick tape in place of #11.Comment
-
yah thats the same advice i gave. i used 3m for my side skirts as well.Originally posted by Kilawin View PostIG: @Baye30
FRONT VALENCE IS ZENDER!!! STOP FILLING MY PM BOX PPL!!!Comment
-
Thats just lazy.:) #11 goes on the end of the skirt between the rear wheel and wheel lip. You need to drill 2 holes in the wheel lip on both sides. #12 is used for the small piece of skirt that goes on the fender. It clips on the inside of the skirt piece. You need to drill a hole in the fender, then the stud on the clip goes through the fender and you put the supplied nut (if you got them) on the inside of the fender.Originally posted by golde30 View PostsigpicComment
Comment