How did you install your ryan g splitter?

[schtozo]

Hey guys, 3m double sided 5lbs tape will do it? Or do i have to use any screws?

[Raxe]

I used 12 screws and double sided tape. Tape on its own is not enough.

[bernzpeed]

Hey guys, 3m double sided 5lbs tape will do it? Or do i have to use any screws?

if u have ordered it from him, it should come with the screws.

[schtozo]

I bought it from a member here on r3v a while back..
What type of screws? Will rivets do it?

[der affe]

You could use rivets or screws. If you have tendency to drag it, the rivet heads are thinner and will not last as long. You could use self tapping teck screws if you do not have a drill.

The best way to go would be to mark and drill it then use something like an 8mm screw and a AN washer on each side followed up with nyloc nut. This way you are not relying on the plastic to hold it tight be the nut and screw to do the work.

[IRON-E]

I used 12 short self tappers and spread them as evenly as possible. I've even ran over my lip 2-3 times when I was low and the splitter saved it from braking., the screw points changed since for me but it works just fine.

[=======Live Fast!]

I used the self tapping screws he included and no tape...they can be purchased at any hardware store if you need em. That splitter looks mean on there...

[agent]

if u have ordered it from him, it should come with the screws.

I have the screws he sent with mine still in the bag since I haven't installed it yet. I'm pretty sure the bag has a BMW part number on it; I'll look at it when I get home and post it.

[agent]

Nevermind - the p/n on my bag with the screws in it was for valve cover bolt grommets.

[Luis325]

Cabron Fady que clase de pregunta es esta? jeje Screw that bitch on!

[Wschnitz]

3M molding tape wouldnt hold it on forever, but can't that stuff is the bomb for attaching cameras.

[schtozo]

Luis que tu haces bumping old as shit threads...

[VinniE30]

Still haven't gotten around to putting mine on yet... I'll probably go with self tapping screws someone here mentioned.
What size did you guys use?

[schtozo]

This is how i ended up doing mine,

[bubbajan21]

^ That is awesome, that thing will never be falling off with that hardware haha :)

Pics of whole car with splitter installed?