If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
How to remove front rubber bumper trim on diving board bumpers
There are pinch clips holding the trim in place. It will be far easier to remove the trim with the bumpers off the car so you can push the clips through from the back side while compressing them with a pair of pliers.
You can try and pry it off while the bumper is still on the car, but it likely won't end well for the trim where the clips are held.
Look under the bumper for the 2 bumper shocks. There are 2 nuts on each shock attaching them to the car. Remove these and your bumper should come right off. No need to remove the plastic trim around the bumper either. Don't forget to unplug the connectors from your turn signals either.
-Justin
sigpic
Current: BMWless for now... '15 Grand Cherokee & '03 Mach 1
Comment