Announcement

Collapse
No announcement yet.

Cant get fixed Quarter window out. Help!!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Cant get fixed Quarter window out. Help!!!!

    Title says it all. I cant get out at all I've tried all the DYI's I've found including the one here. Help me pleasee.


    1989 325is l 1984 euro 320i l 1970 2002 Racecar
    1991 318i 4dr slick top


    Euro spec 320i/Alpina B6 3.5 project(the never ending saga)
    Vintage race car revival (2002 content)
    Mtech 2 turbo restoration
    Brilliantrot slick top "build"

    #2
    did you take out the two nuts in the b pillar? After you do, get a bunch (like 6) flathead screwdrivers, and starting from a forward corner, push the window out while working the screwdrivers under the gasket from the inside of the car. Once you get a corner loose, get the other one, then the window should push out.
    cars beep boop

    Comment


      #3
      Originally posted by kronus View Post
      did you take out the two nuts in the b pillar? After you do, get a bunch (like 6) flathead screwdrivers, and starting from a forward corner, push the window out while working the screwdrivers under the gasket from the inside of the car. Once you get a corner loose, get the other one, then the window should push out.
      yes I took the bolts out.What do you mean by forward corner? and under which gasket inside? the one that runs against the headliner?


      1989 325is l 1984 euro 320i l 1970 2002 Racecar
      1991 318i 4dr slick top


      Euro spec 320i/Alpina B6 3.5 project(the never ending saga)
      Vintage race car revival (2002 content)
      Mtech 2 turbo restoration
      Brilliantrot slick top "build"

      Comment


        #4
        the two 90-degreeish corners that are closest to the front of the car, instead of the one that's toward the back.

        and by under gasket, I mean between the gasket (the one that goes around the window) and the body of the car. The gasket sits on a ridge, and you need to lift it over this ridge to get the window out.
        cars beep boop

        Comment


          #5
          Originally posted by kronus View Post
          the two 90-degreeish corners that are closest to the front of the car, instead of the one that's toward the back.

          and by under gasket, I mean between the gasket (the one that goes around the window) and the body of the car. The gasket sits on a ridge, and you need to lift it over this ridge to get the window out.
          Alright I''l try this. thanks!


          1989 325is l 1984 euro 320i l 1970 2002 Racecar
          1991 318i 4dr slick top


          Euro spec 320i/Alpina B6 3.5 project(the never ending saga)
          Vintage race car revival (2002 content)
          Mtech 2 turbo restoration
          Brilliantrot slick top "build"

          Comment

          Working...
          X