does mtech II lip exist?

[mikeedler]

very interesting on the lip spoiler.
i wonder how come germany didint even get that stuff, or why there is nothing in the ETK about it??
heck, in the land of BMW I would have thought at the million BMW shows Ive been to that some german would know about them, and have one.!
great find though.
the pic M technik put up, thats not even a Tech II front end on that car.
here is a pic of an evo 2 for sale i found on google .de
doesnt have it, and if you look at the wheels, they are actually E34 wheels-odd.

[mtechnik]

i know..but i've seen that spoiler "extension" on a MtechII front end

[Ray Smoodiver]

I have the Aluminium body panels. The part numbers don't even come up. My Evo 1:





Germany didn't get these cars "Evo 1 and 2" because they had the M3 to comete as a racecar, and SA didn't. All the speccy parts are BMW SA built and produced to compete against the Opel Superboss in Group N.

[Ray Smoodiver]

The Evo 1 was built in 03/1990, the Evo 2 was 03/1991 and the Evo 3 was 05/1991.

Strangely, my car was an 05/1990 build, but its an Evo 1 car. No biggie.

Evo 2 and 3 are identical spec.

Also, the Evo 1 motors were based on Early C2 2.7 spec, using the alpina bottom end and a modified 325i head, using a cam more agressive than a 325i, but less than the C2 cam.

The Evo 2 used a full C2 (B3 dependent on market) 2.7 motor, including the head with the larger exhaust valves.

Mine is the only 1 in the country, but we have a couple of 2's, i'll see if I can get some really good pics of the splitter and undertray.

[Ray Smoodiver]

Here is one of the Evo 2's:











Looks like the lip is gone though, ignore ///M badge, its gone now.

[M42Technik]

Good luck ever finding that lip extension. Whoever finds it needs to replicate it and sell that...

For now, I'll be adding an "i" lip to mine...

[///M42 sport]

whats that logo in the center of the lip?

[Teaguer]

whats that logo in the center of the lip?

Yeah I noticed that too on that guys car .



Looks like his might be slightly modded or something .

I would try and track one of them down but probably modify the E36 m3 lip first .
If it turns out decent then maybe I could replicate them somehow .
Hell I've always been good with paper mache' . :)

Oh and the white one above from NZ definitely looks like it has lost its lip among other things along the years .
That ft spoiler is beat .

[mikeedler]

looks like the ever so famed M/// badge on it in the first pic.

[Vedubin01]

so any new news on this? Did the I lip work?

[duuuurtymyk]

omg!!!! whats the specs on andre's car...someone pls tell me....

[Teaguer]

so any new news on this? Did the I lip work?

The "i" lip works but its a little short on the ends .
I've been plating with various Honduh and VDub lips but I'm most likely going to modify an E36 M3 lip to worp befor the car goes in for paint .

omg!!!! whats the specs on andre's car...someone pls tell me....

Its a bondoed POS "eta" . What else is there to know ?

[Vedubin01]

T,

How far off is the E36 M lip to have to modify it to fit?

[Teaguer]

Its too wide by a few inches .
But because the sides flare out and extend the lip forward it will look the best and appear the most OE of all the ones I've looked at or have noticed .

Seems like the best plan is to cut the additional width right out of the center of it and then reatach it and smooth it over .
But I will still be leaving the lip a seperate removeable pice from the spoiler itself .

[Vedubin01]

any idea on part cost? I think I can do this.