How to remove exterior B-pillar trim?

[Jand3rson]

I'm going to be removing the exterior B-pillar trim to repaint it, the 2 wide black pieces on the outside of the car. They are shown below:



I poked around in there for 20 minutes trying to figure out how to get them off, and I couldn't do it. Can someone tell me how to remove it?

[Van Westervelt]

I know the one on the rear is part of the rear window. Two nuts are accessible on the inside. Then the hinge on the rear. Its all one peice. Or am I not helping at all? I want to know how to take off the front one too!





That removes the whole window

[rede30]

I wanted to shoot mine when i was pulling trim to shadowline but I couldnt figure out how to get it off, i would like to knwo as well.

[wycoco]

http://www.r3vlimited.com/Tech/Windowtrim.htm

I totally forgot that there was an actual homepage for R3V. I have the forums on my Favorites, so I'm use to goin straight here. I think that link sorta explains how to take it off.

[formula driver]

Theres a gasket on the inside of the door, roll the window down and carefully pull the gasket out. Underneath the gasket are I think 3 clips. Use a flathead to bend them out and the peice will pull off. Let me know if you need anymore help.

[Jand3rson]

I totally forgot that there was an actual homepage for R3V. I have the forums on my Favorites, so I'm use to goin straight here. I think that link sorta explains how to take it off.

I checked that too, it only tells you how to remove G.