M3 body panels

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Matto
    E30 Modder
    • Jan 2004
    • 800

    #1

    M3 body panels

    Is it possible to use the M3 fenders on a 325i withou replacing every other panel on the car? I probably need at least the door panels. I was wondering if i t would be an easy swap to get some more clearance for some wider rubber, or should I just pull the fenders?
  • krisco
    Advanced Member
    • Oct 2003
    • 180

    #2
    I'd say the easiest thing to do is pull the fenders. I'm not sure if you can use just the fenders off an M3, but I doubt it. If I recall correctly, the M3 has 14 different body panels/pieces than a non-M e30.

    Comment

    • Bill 84 318i
      E30 Mastermind
      • Oct 2003
      • 1600

      #3
      Just roll/pull your current ones.

      Comment

      • franz
        Mod Crazy
        • Oct 2003
        • 631

        #4
        I believe the doors are the same but the bumpers would need to be changed or midified, and although the front fenders are bolt on the rear ones would have to be cut and welded.

        Comment

        • Streetspec_iS
          E30 Mastermind
          • Oct 2003
          • 1622

          #5
          Originally posted by franz
          I believe the doors are the same
          dont forget the doors have no rubbing strip tho.
          sigpicM42 Brigade ... Throwing craze in the 318

          Comment

          • AdamF 88iS
            R3VLimited
            • Oct 2003
            • 2051

            #6
            Doors are not the same.
            Adam Fogg- '88 M3

            Common sense- It's the new 'gifted'

            Comment

            • Avus_325is
              E30 Addict
              • Mar 2004
              • 446

              #7
              If i'm not mistaken only the hood and the sunroof are the same. I think this has been covered before as well.

              Comment

              • e30Matt
                R3V Elite
                • Dec 2003
                • 5077

                #8
                Originally posted by Avus_325is
                If i'm not mistaken only the hood and the sunroof are the same. I think this has been covered before as well.

                "See, we're adding a little something to this month's sales contest. As you all know, first prize is a Cadillac Eldorado. Anyone wanna see second prize? Second prize is a set of steak knives. Third prize is you're fired."

                Comment

                • Stu Mc
                  R3V Elite
                  • Oct 2003
                  • 4083

                  #9
                  Front fenders will bolt on, rears will have to be grafted. Doors are different (molding). The rear valance/license plate sheet metal area is the same for M3's and pre-88 non-M's.

                  Why do you think you need to clear larger rubber? You can stuff 225's under stock fenderwells in a non-M, how much tire do you think you need? For the car in your sig, you won't need more than a 205 or maybe 225.

                  Comment

                  • e30Matt
                    R3V Elite
                    • Dec 2003
                    • 5077

                    #10
                    Originally posted by Stu Mc
                    Front fenders will bolt on, rears will have to be grafted. Doors are different (molding). The rear valance/license plate sheet metal area is the same for M3's and pre-88 non-M's.

                    Why do you think you need to clear larger rubber? You can stuff 225's under stock fenderwells in a non-M, how much tire do you think you need? For the car in your sig, you won't need more than a 205 or maybe 225.
                    Seriously, you've got all of two mods that do close to nothing for your power. Don't worry about huge rubber.

                    "See, we're adding a little something to this month's sales contest. As you all know, first prize is a Cadillac Eldorado. Anyone wanna see second prize? Second prize is a set of steak knives. Third prize is you're fired."

                    Comment

                    • aaron_silva
                      E30 Mastermind
                      • Oct 2003
                      • 1785

                      #11
                      Originally posted by e30Matt
                      Originally posted by Avus_325is
                      If i'm not mistaken only the hood and the sunroof are the same. I think this has been covered before as well.
                      Mirrors.

                      Aaron

                      Comment

                      • e30Matt
                        R3V Elite
                        • Dec 2003
                        • 5077

                        #12
                        Originally posted by aaron_silva
                        Originally posted by e30Matt
                        Originally posted by Avus_325is
                        If i'm not mistaken only the hood and the sunroof are the same. I think this has been covered before as well.
                        Mirrors.

                        Aaron
                        Aah, but some are body color and some are not. Grasshoppa. :)

                        "See, we're adding a little something to this month's sales contest. As you all know, first prize is a Cadillac Eldorado. Anyone wanna see second prize? Second prize is a set of steak knives. Third prize is you're fired."

                        Comment

                        • Matto
                          E30 Modder
                          • Jan 2004
                          • 800

                          #13
                          Yeah, I have almost no mods now. I am trying to figure out what to do down the line. I thinhk I'll stick with pulling fenders, way less complicated.

                          Comment

                          Working...