Volvo lip mounting methods

[deutschman]

i suggest triming the lip just enough to fit, then mounting it, then trimming to fit. you wouldn't want to go cutting to much off!

[IRON-E]

alright, cool. i should be able to do this no prob.. im sure it was easier than swapping the valance

Hey Stephen, You'll have to remove about 3 fingers worth of plastic from each end of the lip. I say 3 fingers, because that way you have plenty of room for fixing any screw-ups, in the end you'll have removed about 3-3.5 inches from the ends and yeah self tapping screws is the best way to go, for the volvo lip.









PS. Did the wall of smoke clear up from car yet?

[ethree]

I'm going to mock up the volvo lip with the clips on my valence that aren't broken, then use the holes where I removed all the broken clips to mark the volve lip, then drill the lip and use copious amounts of zipties to hold it nice 'n' tight. There are already a shit ton of holes in the bottom of the valence.

[Stephen]

alright, cool. i should be able to do this no prob.. im sure it was easier than swapping the valance

[Danny]

You'll be fine, nothing that cant be repaired easily.

[Stephen]

I don't know if its any more self explanatory than that.

Get under your car with a drill and go to town.

fair enough...

[Danny]

I don't know if its any more self explanatory than that.

Get under your car with a drill and go to town.

[Stephen]

Basically i'm just looking for ideas so i don't fuck up my valance after doing the swap..

[Danny]

Well its dark.

I'll post some up tomorrow.

[Stephen]

Danny, post up some pictures of the exact way you did it so Stephen can attempt to do this himself. I was going to help him out but I have a bunch of shit going on in the next couple weeks.

Actually, I'm not gonna single Danny out alone.


All you other bitches that did the volvo lip, post your pictures of the mounting as well!!!:hitler::hitler:


I'm playing but really, post some pics.





Taylor

You heard the man.

[E30_fiend]

Danny, post up some pictures of the exact way you did it so Stephen can attempt to do this himself. I was going to help him out but I have a bunch of shit going on in the next couple weeks.

Actually, I'm not gonna single Danny out alone.


All you other bitches that did the volvo lip, post your pictures of the mounting as well!!!:hitler::hitler:


I'm playing but really, post some pics.





Taylor

[Stephen]

Self tapping screws into the valence.

Yeah, my friend taylor said that worked well..

[Danny]

Self tapping screws into the valence.

[Stephen]

did mine with screws and some small washers to keep the screws from ripping threw if i hit anything. works well.

good to know, did you drill into the valence or use existing holes?

[deutschman]

did mine with screws and some small washers to keep the screws from ripping threw if i hit anything. works well.