If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
will need samples and a "guestimate" on demand. Send me a PM.
For red cars, I have a orange reddish/burgundish combination that I choose at the factory (I have a 2002 that will be painted Audi Papaya Orange, close to the original Colorado orange). Open to suggestions. The pattern is already in the computer is just a matter of putting a different thread color.
Hi!
Is this fabric for red cars already "alive", any photo?
Sorry for the delay. I sent off both new and old school samples with my supplier. He is still overseas, but I will update once I hear from him. Thanks for your patience.
OK guys some soap opera/telenovela update for you guys. Yesterday jm335i sent me a PM regarding the cloth status. (which BTW was in the back burner).
As you guys might NOT know, I did had a sample run made late January (after coming back to the US) of a little bit less than 1/2 a roll (a roll is 100mts) of the blue/green pattern. My friend usually makes a small run to make sure everything is ok (weight, color, blah, blah, blah). The fabric was picked up by a relative and confirm me it was very good. A few days later, he email me and told me that somebody saw it (through his upholstery guy, see my MT2 steering wheel on this thread) and wanted to buy the whole thing. Since I didn’t want to deal with all the hustle of shipping, customs etc, I told him to sell it so I could recoup all my setup and materials cost.
I told jm335i that I would email my friend and find out when could he fit a production run. (Usually between large orders). To make the story short, I got an email today that they can start making it in 30 to 40 days from now (it only takes a day.)
COST WILL BE 40 (FORTY) US PER METER shipped to an US Address. For the first 6 mts. After that I will add a bit more for large orders (non US addresses will pay actual shi.
Right now I’m trying to negotiate a second color combo and the minimum quantity. I hope I don’t get too many flakes since the minimum order is quite large. (larger than was originally agreed on.) Just the shipping weight will be well over 1000 pounds.
I” start a thread with names and qty to get a 'guestimate.'
Comment