Retrofit E36 window switches
Collapse
X
-
-
For you guys curious about the 4 door bezels. I've done this on both of my E30s, you really don't notice the curve too much.
Moved inside and worked on the console I picked up at the yard. I used a two door console with the cutout for the breaker switch. I dremeled the right side to fit, then matched the angle on the other side with a ruler and a pencil.
There's metal under the plastic and foam to form the shape of the stock cut outs. These have to be cut away for the switches to fit right.
They are connected either on two sides or one side by more metal. The bottom had two, the top had one, so all I had to do was cut one side with the dremel, then pull it off with some pliers.
Bezeled mounted
And everything mounted
What it looks like underneath
Dremel nicked it. You can also see the cut away.
Bezels reinstalled and then hot glue was applied to fill the gaps and keep it in place.
The type of E36 switches I have are the LED type out of a 93 318i 4 door. So no burnt out lights!
Comment
-
Anyone know where to get replacement LED bulbs and resistors as is shown in the picture above? My Blue base e36 switches have LED's and are fine. My white base have incandescent and they are burnt out and I just want to solder in a set of LED's and resistors.
Any info is appreciated.Comment
-
Originally posted by SpasticDwarf;n6449866Honestly I built it just to have a place to sit and listen to Hotline Bling on repeat.Comment
Comment