Anti-Lock Abs Light

[Zinno_e30]

How do I remove the ABS light bulb? I do not want to pay $100 for the relay and would rather just pull the bulb. The brake lining light will be addressed with new brake bad sensors and a new SI board will be going in as well to take care of the oil service/inspection light that wont clear.

Back of cluster for reference:


Said lights:

[kmarei]

You mean the brake lining bulb correct?
The abs bulb is different than the other bulbs
The other bulbs are mounted to a plastic base
The abs bulb is attached to 2 wires that fits into the socket
To remove the brake lining light
Just twist the base that has an exclamation mark inside a circle pictured in the lower right hand corner of your top picture
Twist it 90 degrees and it comes out

[jeffnhiscars]

You may find that the brake lining light is not the result of bad sensors as there are other causes. As for replacing the SI board chances are its just the batteries which can be bought for $20 and soldered in.