Announcement

Collapse
No announcement yet.

Issue with AC knob control/switch

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Issue with AC knob control/switch

    Hi Everyone,

    So a few days ago I took out my whole radio/hvac trim to have it replaced with a better one. Unfortunately, after I finished installing it - my ac knob (the one that regulates how strong the air comes out) started to act weird. Now, the 1 setting blows like a 4, and the 4 like a 1, and the 2&3 settings do not blow at all. It also doesn't feel the same when changing settings, it slides more...weird.

    Has someone experienced this before that can guide me in the right direction? I'm 99.99% sure I installed it back correctly...

    #2
    Sounds like the blower motor fuse blew. Check (I think?) the #20 fuse to see if its blown.

    Comment


      #3
      If it blows at all it's not the fuse. Did you remove the wires f on the switch by chance ?
      Deck Lid and soft top Shocks on hand

      Seat shocks on hand for immediate shipment
      https://www.r3vlimited.com/board/sho...86#post4944786
      Alice the Time Capsule
      http://www.r3vlimited.com/board/showthread.php?t=360504
      87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220

      Comment


        #4
        Originally posted by jeffnhiscars View Post
        If it blows at all it's not the fuse. Did you remove the wires f on the switch by chance ?
        No I did not remove/cut any wires...all i did was remove the switch from the back...

        Comment


          #5
          make sure you have the correct plug for the switch..it's easy to swap sockets around.
          sigpic

          Comment

          Working...
          X