Since I changed my HVAC panel, my foot vents have been blowing out a lot of air even when the knob is closed all the way.
I checked the cable and its hooked up to the HVAC panel fine. I also found the lever it turns on the heater core under the dash and made sure it was pushing it all the way open/closed, and it is.
Any ideas how to get the vents closed again, without breaking anything?
I checked the cable and its hooked up to the HVAC panel fine. I also found the lever it turns on the heater core under the dash and made sure it was pushing it all the way open/closed, and it is.
Any ideas how to get the vents closed again, without breaking anything?
