I am looking for info/photos on this swap. Thanks Brian
Announcement
Collapse
No announcement yet.
Vader seat pics/install
Collapse
X
-
I don't have any good pics but I have Vaders in my car. I made the brackets out of 1/4 inch steel rather than drilling the unibody which I have heard others have done.
I bolted the belts to the brackets I fabricated (which are bolted to the floor using the stock seat belt holds) using 1/4 inch angle iron and grade 8 bolts making sure not to kink the seat belt webbing (nylong webbing is strongest when it is not folded or kinked).
I am currently trying to source some sedan seat belts because I believe that bolting the end of the lap belt to the B-pillar using the stock mounting point for the slider bar is probably better overall.
Comment
-
the link doesnt work :(, im having some troubles :S , ive got the brackets and works great, but the problems are the seatbelt When you put it in without modifing the nipple . the seatbelt sensor from the car came 2 wires to the connector and the vares has a 3 wires connector so im confused .this seat has the pyrotechnic protection ? any one knows how i can make it work? which wire must be connected?.
ive got a 4dr
Comment
Comment