Originally posted by CW325
View Post
Announcement
Collapse
No announcement yet.
The steering wheel thread
Collapse
X
-
Just ordered a black Momo Prototipo. I was looking at a Montecarlo but the Prototipo was $20 cheaper.
M20B23 Euro 323i - The Legend Of Ron Burgundrot
Comment
-
Originally posted by Vicarious View PostHas anyone ever tried wrapping a steering wheel in bicycle grip tape? I ride bikes and got pretty good at doing it. Seems like a good idea. What do some of you think? I mean yea its all subjective style wise, but do any of you think it'll be worse than an old slippery dirty wheel?
It was very sports car in the day, obviously its more track car than pimpin car.
had a 81 rx7 like that,
Comment
-
Originally posted by atomic View PostOEM BMW Nardi Blackline 365mm (??)
Put into a airbag car (non track use though)
uses the standard Nardi hub for the BMW e30 only, no quick release, extension installed...
In a airbag car I found both on a MOMO wheel and this wheel that I had to use 2 spacers from a non airbag e30 found behind the steering wheel on the column. It is #4 in this link : http://www.realoem.com/bmw/showparts...47&hg=32&fg=30
You will have to put one on the column before the steering wheel then another on the column after the steering wheel is on. Then top it off with the washer and lock nut to mount steering wheel. I tried using washers but they made a lot of noise when turning the wheel.
so i need two #4 spacers?
Comment
-
SRS Question
So I would like to keep my air bag :firehop:(it saved my life once) (click my sig and look at pic #5).....
Do I have any options for other airbag wheels??
Or since I drive a 91 318 and it was pretty much near the begining of the SRS tech (I assume the tech has changed) am I SOL???
Comment
Comment