Making my own gauges, beware of the cupholder!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • atomic
    replied
    You probably need to take an old gauge face to a vinyl lettering sign store and and see if they have or can get some material that is similar to the originals. That way light can shine through.

    Hell they might even be able to take your design and enter it into their system and print and cut them out for you. Just a thought

    Leave a comment:


  • soviet1942
    replied
    To tell you the truth, I don't know.

    Originally posted by JasonC
    This looks like a simple but yet hard project. How are you going to get the light to shine through the gauge faces that you are makeing now?

    Leave a comment:


  • JasonC
    replied
    This looks like a simple but yet hard project. How are you going to get the light to shine through the gauge faces that you are makeing now?

    Leave a comment:


  • soviet1942
    replied
    Originally posted by atomic
    :ohsnap:

    Looking like you have a good base to start with just keep the bondo away from this project and you should do just fine...

    Bondo FTW

    The cupholder will be something I'll never forget, it works well though until I get the e46 center console.

    Leave a comment:


  • atomic
    replied
    :ohsnap:

    Looking like you have a good base to start with just keep the bondo away from this project and you should do just fine...

    Leave a comment:


  • soviet1942
    replied
    Thank Sean for that. He is the man who gave me the template. I am not done yet. Finding a good font is really hard and I don't know if I am digging the Alpina purple cluster tone.

    Leave a comment:


  • Ray Smoodiver
    replied
    The way you made each increment the same size is incredible.

    Leave a comment:


  • soviet1942
    started a topic Making my own gauges, beware of the cupholder!

    Making my own gauges, beware of the cupholder!

    I know I have some tacky style but it all good. I am just testing what I can do and how I really want my gauges to look. This is my first attempt, I kind of like it but it has a long way to go. I have to thank Sean for giving me the template (which Jordan may have made). If it weren't for him I would have never been able to do this.

    I need to figure out on what type of paper I should print this on and how I could properly cut it.

    Last edited by soviet1942; 03-03-2008, 07:35 PM.
Working...