Wiring a euro clock?

[lordofthewaters]

No.

[erik325i]

Can you guys tell me which colour wire go where? I don't have the harness so can't go with the original colour wires. It has 4 pins in the back and are labelled: 30, 319, 31, 58k from left to right. Could you tell me which colour goes to which number?

If you search for "analog clock" with my username, you will find the answer because I've posted it before.

*Edit* Here you go:

http://www.r3vlimited.com/board/showthread.php?t=61247

-Erik

[ches]

If you search for "analog clock" with my username, you will find the answer because I've posted it before.

*Edit* Here you go:

http://www.r3vlimited.com/board/showthread.php?t=61247

-Erik

Thanks, you are the best!

[cnardinola318is]

I also am having this problem, if you find a solution please let me know, my ana. clock is only right 2 times a day! wish it worked

[erik325i]

I also am having this problem, if you find a solution please let me know, my ana. clock is only right 2 times a day! wish it worked

The answer is right above you.
Go to:

http://www.r3vlimited.com/board/showthread.php?t=61247

You will find out what which wire is for and you just need to tap into three of the wires from your OBC. constant power, illumination, and ground.

-Erik

[ches]

If you search for "analog clock" with my username, you will find the answer because I've posted it before.

*Edit* Here you go:

http://www.r3vlimited.com/board/showthread.php?t=61247

-Erik

Finally got around to do this. So according to this:

30 ----- power
31 ----- ground
58k ----- power for light
31g ----- ground for light


Not confident about my ability at reading diagrams but I got this:

30 - R/GR
31 - BR
58k - GY/R
31g - BR/W

Can someone confirm that I am getting it right? From my 6-button harness, some of these colours are not matching, am I looking at the diagram wrong??

[ches]

Finally got around to do this. So according to this:

30 ----- power
31 ----- ground
58k ----- power for light
31g ----- ground for light


Not confident about my ability at reading diagrams but I got this:

30 - R/GR
31 - BR
58k - GY/R
31g - BR/W

Can someone confirm that I am getting it right? From my 6-button harness, some of these colours are not matching, am I looking at the diagram wrong??

Or shoud it be this:

31 - BR
30- R/W
31g - BR/W
58k - GY/R

????

I am confused.