by looking at some diagrams and the actual wiring in the car, I matched these wires with their corresponding function. Some of the colors of the wires were slightly different than those referred in the diagram, so if someone knows this already, please correct me if I´m wrong or confirm I´m right. Before you ask, I can´t test it with the car itself because it´s not running.
Left side tail light (please note the wires are numbered at the connectors)
1 blue/red=turn signal
2 green/brown=brake
3 brown=ground
4 blue/white=reverse
5 gray/yellow=park
6 empty
Right side tail
1 empty
2 gray/white=park
3 blue/white=reverse
4 brown=ground
5 red/green=brake
6 blue/black=turn
Windshield wiper wires
harness side FUNCTION motor side
brown=GROUND=brown
red/black=SINGLE WIPE=white
black/white=FAST=red
yellow/black=SLOW=green
thanks!
Left side tail light (please note the wires are numbered at the connectors)
1 blue/red=turn signal
2 green/brown=brake
3 brown=ground
4 blue/white=reverse
5 gray/yellow=park
6 empty
Right side tail
1 empty
2 gray/white=park
3 blue/white=reverse
4 brown=ground
5 red/green=brake
6 blue/black=turn
Windshield wiper wires
harness side FUNCTION motor side
brown=GROUND=brown
red/black=SINGLE WIPE=white
black/white=FAST=red
yellow/black=SLOW=green
thanks!
Comment