are RHD ellipsoids different?

[e30sd]

since they drive on the other side of the road. i mean is the cutoff to the left instead of the right?

[e30sd]

nevermind, i guess they're like this

\__\__


instead of this

__/__/

[E30ownerwithanopinion]

just mount them upside down.

[e30sd]

just mount them upside down.

but then they'd be frownies :(

[E30ownerwithanopinion]

yes since they were displaced from EUROOOOOOOOOOOpe they will be sad.

[KenC]

You can rotate all ellips to be either LHD or RHD.

[e30sd]

You can rotate all ellips to be either LHD or RHD.

how say you young man? rotate? do i actually swap the projectors side to side?

[KenC]

You can rotate all ellips to be either LHD or RHD.

how say you young man? rotate? do i actually swap the projectors side to side?

You see the three screws on the back of the part that holds the bulb and lens? Loosen them all and rotate the rear piece. It'll go from \_ to _/.

[e30sd]

You can rotate all ellips to be either LHD or RHD.

how say you young man? rotate? do i actually swap the projectors side to side?

You see the three screws on the back of the part that holds the bulb and lens? Loosen them all and rotate the rear piece. It'll go from \_ to _/.

do you speak from experience?

[Digitalwave]

You can rotate all ellips to be either LHD or RHD.

how say you young man? rotate? do i actually swap the projectors side to side?

You see the three screws on the back of the part that holds the bulb and lens? Loosen them all and rotate the rear piece. It'll go from \_ to _/.

do you speak from experience?

Ken is definately one to experiment... if you know what I mean....

[KenC]

You can rotate all ellips to be either LHD or RHD.

how say you young man? rotate? do i actually swap the projectors side to side?

You see the three screws on the back of the part that holds the bulb and lens? Loosen them all and rotate the rear piece. It'll go from \_ to _/.

do you speak from experience?

Yeah, I bought a set of euro ellips from the UK about a year ago and converted them to LHD ones. It takes like 5 minutes for both to switch.

[e30sd]

thanks ken. your wisdom goes beyond what few years you've been around. i salute you youngster.

[Ryan Stewart]

You will need to undo the screws and pull the backs out a bit to rotate. There is a tab that goes into the front part of the lense that makes sure you dont align them wrong. as long as that tab finds the slot you are good.

[BavarianBimmer]

You will need to undo the screws and pull the backs out a bit to rotate. There is a tab that goes into the front part of the lense that makes sure you dont align them wrong. as long as that tab finds the slot you are good.

That's the right way

I talk from experience, they're marked with L/G (Left/Gauche) and R/D (Right/Droite)
so it's LHD and RHD ,