Announcement

Collapse
No announcement yet.

Turn signal issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Turn signal issue

    So I am having an issue with my driver front turnsignal. About a month ago it stopped working, bought a new bulb and it was still dead.. So my next step was replacing the whole turn signal assembly... Still nothing.. So what should I look at next?

    Car hasn't been in an accident, all my other signals work. Any ideas?

    Oh this is on a 87 325 with DB's

    #2
    fuse?
    mine work on and off because of loose wire.

    Comment


      #3
      relay?

      Comment


        #4
        I thought about a relay but figured BMW wouldn't have a relay for each signal.

        On the fuse all of them were replaced when I bought it. It stopped working a couple months after I replaced them.

        Comment


          #5
          Odds are that three pin connector on the back of the light housing itself dissolved a pin or two from corrosion. Have a look, just reach under the bumper and pull, there aren't any clips to squeeze or anything to release it. Does the connector look clean and healthy?
          -Dave
          2003 Lincoln Towncar | 1992 BMW 325iC | 1968 Cadillac Deville

          Need some help figuring out the ETM?

          Comment


            #6
            Just seeing this I'll have to look at it tonight after work

            Comment

            Working...
            X