Announcement

Collapse
No announcement yet.

Weird HID issue - strobe lights!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    I just had mine wired up wrong. Works great now.
    Originally posted by Gruelius
    and i do not know what bugg brakes are.

    Comment


      #17
      Originally posted by airkhin View Post
      ^^bumping this to the top... i just installed my hid's, it doesnt strobe, but when i first turn the lights on, the drivers side doesnt turn on and i get a warning light in check panel. if i turn the lights off and turn them on again it works perfectly, but warning is still there...

      i currently only have the low beam hid's hooked up if that makes a difference. car is a '88 m3
      Warning lights on the overhead display always lights up on the euros too,
      Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

      If you have bought items from me, please leave feedback below.
      If you are a BUYER, Check My Feedback.:up:
      http://www.r3vlimited.com/board/showthread.php?t=183860

      Check out my Euro Build Thread
      http://www.r3vlimited.com/board/showthread.php?t=215557

      Comment


        #18
        Originally posted by airkhin View Post
        ^^bumping this to the top... i just installed my hid's, it doesnt strobe, but when i first turn the lights on, the drivers side doesnt turn on and i get a warning light in check panel. if i turn the lights off and turn them on again it works perfectly, but warning is still there...

        i currently only have the low beam hid's hooked up if that makes a difference. car is a '88 m3
        Same problem for me right now, but it's my passenger side, and I don't get warning lights because I don't have a check panel xD

        Comment


          #19
          mine does the whole start to warm up thing then gives up haha i think its because i broke the conduit (thats spelled wrong) around the top wire haha
          sigpic
          ^Back in the game^
          BUILD THREAD: http://www.r3vlimited.com/board/showthread.php?t=201281
          FS thread:
          http://www.r3vlimited.com/board/showthread.php?t=214105

          Comment


            #20
            Originally posted by DaveSmed View Post
            Sounds like the HID is trying to find a ground through the H1s. Both H1s combined make an "okay" ground for one ballast, but not both.

            Make up a temporary separate ground for the ballast to check, and verify the brown wires at least have basic continuity to ground.
            I'm having some electrical issues like this, DaveSmed I'm going to pay your fuel and expenses if you come out and work on my car for the day!!!
            sigpic
            WTB-Strut Bar

            Comment

            Working...
            X