hey guys- i have a problem where the high beams will come on when i pull the stalk backwards (momentary flash) but when i click them forward to leave the highs on, nothing happens. do i need a new stalk or a new relay?
thanks!
thanks!
-
-
posting and update because this still isnt fixed.
I went ahead and replaced the stalk + stalk relay, as well as the K3 (high beam) relay in the fuse box and the problem persists. any ideas? -
That is strange. I would say the wiring to the lamps are okay since they come with the momentary switch. Download the ETM and see what the circuit looks like between momentary and full ON."I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj
85 323i M TECH 1 S52 - ALPINEWEISS/SCHWARZE
88 M3 - LACHSSILBER/SCHWARZE
89 M3 - ALPINEWEISS II/M TECH CLOTH-ALCANTARA
91 M TECHNIC CABRIO TURBO - MACAOBLAU/M TECH CLOTH-LEATHER
Comment
-
Yeah I figured that's where I'd dig next. Heres the ETM:Originally posted by reelizmpro View Post
It appears that the switch does take a different path based on flashing or switching the highs on, so it looks like a bad Low Beam relay or wire connection to the fog light switch may be the culprit. Does someone with more expertise in ETMs agree?
If i recall, one of the POs bypassed the regular fog light wiring and ran some new wires in order to bypass the check and allow them to use independent fogs. Am I screwed?Comment
-
Find the location of C202 and C103 in the ETM and check the wires/pins for corrosion or breaks."I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj
85 323i M TECH 1 S52 - ALPINEWEISS/SCHWARZE
88 M3 - LACHSSILBER/SCHWARZE
89 M3 - ALPINEWEISS II/M TECH CLOTH-ALCANTARA
91 M TECHNIC CABRIO TURBO - MACAOBLAU/M TECH CLOTH-LEATHER
Comment
Comment