Fog light swap problems

[park123xyz]

So I am trying to swap over my fogs from these weird looking older fog lights that do not fit the valance..



To these cheap yellow ones I bought:



I bought the correct connectors to fit the new lights and i was just assuming that i could splice the two wires going into the old fogs to the connectors going into the new ones. I tried touching the wires to the connector and Fog light but it did not turn on. Any Ideas? Thanks

[mr.vang]

No bulbs?

[park123xyz]

No bulbs?

Shit.... im a dumbass. I assumed there were bulbs in them already.

[park123xyz]

still not working though :/

[park123xyz]

No bulbs?

I put the bulb in but it doesnt look like the circuit is being completed here.. Do i need a wire in there or something?

[DrJosh]

Yes there is wire missing. There should be a wire from the bulb to the female plug on the left. The wire is part of the bulb, and it is a H3 bulb.

[mr.vang]

https://www.google.com/search?q=e30+fog+light+bulbs&biw=1600&bih=799&source=lnms&sa=X&ei=R5jmVKauK8TmoAT4x4HQDg&ved=0CAcQ_AUoAA&dpr=1

lol, shit happen

[Nick_S]

I bought those same ones off ebay. They are absolute dog shit. The connecters aren't even close. Email the seller, they should give you a refund. You can find a decent set of use OE fogs and get some yellow Lamin-x and they will actually work.

[mr.vang]

I have an oem zkw set, come with bulbs and pigtails. I'll do $100 shipped, let me know if you're interested.

[park123xyz]

Thanks guys.


Sent from my iPhone using Tapatalk

[park123xyz]

I bought those same ones off ebay. They are absolute dog shit. The connecters aren't even close. Email the seller, they should give you a refund. You can find a decent set of use OE fogs and get some yellow Lamin-x and they will actually work.

i know.. Im so pissed


Sent from my iPhone using Tapatalk