based on this DIY article, which seems very thourough, where can i get the connectors to hook up the lights, i already have the stuff highlighted in red, so where can i find the other parts:
1 set of European Spec Ellipsoidal Headlights
2 x High Beam Caps* [PN 63-12-1-381-190]
2 x High Beam Connectors* [PN 61-13-0-007-445]
4 x Circular Wiring Connectors [PN 61-13-0-007-445]
About 8 feet of 16ga wire (18 is OK too, 16 is preferable)
12 Crimp Splice Connectors for 14-16ga wire
4 pairs of spade connectors (optional)
An assortment of Heat Shrink Tubing (Alternatively you can use electrical tape, it is just messier if you ever change the wiring).
1 set of European Spec Ellipsoidal Headlights
2 x High Beam Caps* [PN 63-12-1-381-190]
2 x High Beam Connectors* [PN 61-13-0-007-445]
4 x Circular Wiring Connectors [PN 61-13-0-007-445]
About 8 feet of 16ga wire (18 is OK too, 16 is preferable)
12 Crimp Splice Connectors for 14-16ga wire
4 pairs of spade connectors (optional)
An assortment of Heat Shrink Tubing (Alternatively you can use electrical tape, it is just messier if you ever change the wiring).
Comment