Announcement

Collapse
No announcement yet.

fog lights have a case of the one-eyed willies :(

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    fog lights have a case of the one-eyed willies :(

    passenger side fog works, driver side is out

    replaced the bulb, so that's not the issue

    where should I start? where's the weakest link?

    thanks guys

    #2
    fuse box....?
    IG: @Baye30

    FRONT VALENCE IS ZENDER!!! STOP FILLING MY PM BOX PPL!!!

    Comment


      #3
      I have a fog light that doesn't like to come on unless you prod at the plug a bit. I need to take it out to figure out what's wrong with the contacts.

      Comment


        #4
        A few that I pulled out of the junkyard as well as the ones that came with my car have had loose plugs. Pop off the bottom cover, and re-crimp the connector. I used a small hammer and a punch. I then used a wire wheel to get the connector down to bare metal and soldered the connectors. You need a really powerful soldering iron, though.

        Project M42 Turbo

        Comment


          #5
          yah, I'm not even getting juice to the bulb. are they separately fused?

          Comment


            #6
            yes they are.
            IG: @Baye30

            FRONT VALENCE IS ZENDER!!! STOP FILLING MY PM BOX PPL!!!

            Comment


              #7
              fuse!

              thanks guys!

              Comment

              Working...
              X