tweeter wiring question with aftermarket HU

[digital_cowboy]

Provided the stock tweeter wiring is in place and connected to the mid, here are the only connections you need to make from the HU to the front stock component system:

Headunit to Speaker
RF+ GY/WT wire's post. (Large Post)
RF- GY/BR wire's post. (Small Post)
LF+ GY/RD wire's post. (Large Post)
LF- GY/VI wire's post. (Small Post)

Fuck, man, quit being wrong.

If you leave the tweeter ground wire and the stock mid wire connected to the amp, it WILL fuck up your deck.

You have to make sure the tweeter ground (gray/green) is no longer connected to the harness from the amp.

The wiring I suggested is perfect in place of the stock wiring. I was by no means suggesting that he ADD the new wires to the existing ones. He said he was replacing the stock wiring. Simply unplug the stock wires from the post and replace with the new ones.

WTF.

[paulkeith]

The wiring I suggested is perfect in place of the stock wiring. I was by no means suggesting that he ADD the new wires to the existing ones. He said he was replacing the stock wiring. Simply unplug the stock wires from the post and replace with the new ones.

WTF.

If you do it exactly as you've described, you fail to close the tweeter circuit (-) back to your headunit's (-).

[StereoInstaller1]

I try to explain it to these guys, but until you actually DO it, it makes no sense.

Oh well, yours is rocking!

Wait till you get your sub on that, then later, add better power to the fronts.

Mind blowing sound from stock crap. I just wish guys here could hear JParkers system!

Luke