6button vs 13button obc wiring question

[Jean]

Does anybody have a picture of the 6button vs. 13button obc wiring harness?

Or just the 6button one, as I have a 13button obc wiring on hand.

thanks

[scottinAZ]

I should have a copy on hand from when I sold my 6 button.

They arent the best, but I have one of each

13 button harness


6 button harness


hope this helps

[Jean]

Thank you! I picked up a 13 button from a parts car, thinking that maybe I'll add the OBC to my car but I don't think I am going to bother. I might add the 6 button though..

[scottinAZ]

its not hard to add. If you already have an OBC then the wiring to the temp sensor should already be there. other than that, its the same labor to install the 13 button as the 6 button. run the wiring harness, hook to gong, cluster, etc. all the "stuff" sholuld be there, except for the "code" function, and that isnt really desireable anyways (IMHO) as it is a point of failure that can leave you stranded.

[aaron325ix]

If youre going to add one, go with the 13 button. Adding a 6 button is like replacing your cracked dash with one that has that little seat belt light thingy on it.;)

[iwantspeed]

can any one identify which color connector goes where.
there are some that go towards the cluster
door gong
code box
temp sensor

and obviously the OBC

[nando]

it's all pretty obvious when you go to hook it up... all the connectors are color coded.

[iwantspeed]

I found this article on how to do it.

http://r3vlimited.com/tech/obc/obc.htm