If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have an IDQ10v3 arriving later this week. For the short term, I'm running it off the B-channel of my X4R, but eventually I'll probably take the fronts active.
Interestingly, I've found that it is actually possible to install the Hybrid Claris C6 midbasses in the doors without a pod. I spaced out the window regulator about a quarter inch (what a pain!), and put three layers of damplifier pro around the hole I cut in the door panel. Now, if only the power connectors would arrive, so that I can hook up the amp.
I have an IDQ10v3 arriving later this week. For the short term, I'm running it off the B-channel of my X4R, but eventually I'll probably take the fronts active.
Interestingly, I've found that it is actually possible to install the Hybrid Claris C6 midbasses in the doors without a pod. I spaced out the window regulator about a quarter inch (what a pain!), and put three layers of damplifier pro around the hole I cut in the door panel. Now, if only the power connectors would arrive, so that I can hook up the amp.
Comment