Announcement

Collapse
No announcement yet.

Power antenna help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Power antenna help

    My power antenna likes to work intermittently. The connector on top of it is shoddy at best. The connections are clean and been sprayed with electrical connector stuff. It's very annoying. It was working all day yesterday and towards the end of the day it stopped, and I gotta fuck with the connector to get it to go up or down. It works like a champ though when it is working.

    Any advice on getting this thing a better solid connection?

    I don't get what's up with the connection everything's tight and the connections are clean, and they only work in certain positions it's very odd. Maybe the si board is bad on the antenna? The motor is brand new.
    Last edited by HarryPotter; 03-09-2010, 05:02 PM.


    "Its preparations are concealed, not published. Its mistakes are buried not headlined. Its dissenters are silenced, not praised. No expenditure is questioned, no rumor is printed, no secret is revealed."

    John F. Kennedy

    #2
    ??

    I have the same problem....post when you get it figured out. Good Luck.
    FEEDBACK:
    http://www.r3vlimited.com/board/showthread.php?t=316212

    BMWCCA #398608
    IG @yagayo38

    "The Best E30's were built with two camshafts four cylinders and sixteen valves!".

    Comment


      #3
      Check the white wire at the back of the HU. I've also had older factory decks whose remote signals were intermittent and have crapped out.
      [IMG]http://www.r3vlimited.com/board/

      Comment

      Working...
      X