Subwoofer Box Build: Spring 2010

[Rodoni]

IIRC the 12" ones are through the deck and the 10" port through the ski pass

[StereoInstaller1]

Are these being made with the deck ports or the ski pass ports?

the 10" box is too shallow to port through the rear deck. You need a minimum of 6" depth at the top of the box, and you MUST have a 15" height to make a seal on the ski pass.

One left this round, boys.

OH!: I may be moving again, but this time to a house out on the country that has a 24X48 shop....pray for me!

[Jean]

I would be all over this (plus I already have a nos polk db sub sitting on a shelf for months)if my car actually had a stupid ski pass...it doesn't as it's a very early 84. great price!

[Tuanies]

the 10" box is too shallow to port through the rear deck. You need a minimum of 6" depth at the top of the box, and you MUST have a 15" height to make a seal on the ski pass.

One left this round, boys.

OH!: I may be moving again, but this time to a house out on the country that has a 24X48 shop....pray for me!

Where at?

[Gerta]

+1 on the location!

Luke - congrats on a potential move! Where's this palace going to be at?

[StereoInstaller1]

Luke - congrats on a potential move! Where's this palace going to be at?

We will see, but about 6 miles form here.

Internet is a HUGE issue out there though. Anyone know who else uses AT&T 3G besides AT&T? They want $60/mo for 5GB usage. No clearwire, no comcast, no verizon, no DSL, only point to point or 3G AT&T.

Half miles from the road means Commiecast wants $13K to run a drop.

[Tbolt]

You mean the face?


The back is shown finished earlier in this thread.

thats a 10" sub?

[StereoInstaller1]

Yup, that is a normal 10" deluxe box with a IDQ10V2.

Purdy, huh?

[AndrewBird]

This might help give some kind of reference:


That is with the outside measurement at 4" on top and 10" on the bottom with an Infinity Reference 1062W sub. I wasn't exactly sure where the sub was located, so I just put it centered on the slanted side. If you let me know, I can redraw it real quick to be a little more accurate.

[StereoInstaller1]

This might help give some kind of reference:


That is with the outside measurement at 4" on top and 10" on the bottom with an Infinity Reference 1062W sub. I wasn't exactly sure where the sub was located, so I just put it centered on the slanted side.

Next time you are in my town would you please teach me how to do some of that stuff?

[5ickride]

wait, are you selling the sub boxes again?

[AndrewBird]

Next time you are in my town would you please teach me how to do some of that stuff?

Sure!

If you ever need anything drawn up, let me know.

[StereoInstaller1]

wait, are you selling the sub boxes again?

yeah, gonna do 4 at a time, 10" only, until I get a shop again.

You want a 10 or a 12?

[Gerta]

Did you get a final buyer for the 4th box? If not, you know I'll be picking it up in a month or so.

[StereoInstaller1]

Done, boys.

Next round soon, keep a watch out.