Okay so the other day I was driving and the speakers cut out. the headunit was still on and everything, but nothing was playing. No idea why. then my taillights went out. looked in the fuse box and fuse 22 was blown. its a 15 amp fuse so i put another 15 in. blew it instantly. so i put a 30 in. blew it instantly. put a 7.5, which is what is supposed to be in it, and blew that instantly as well. i have no idea whats going on with it. any advice would be greatly appreciated. thanks, garrett
Fuse 22 blowing and radio cutting off
Collapse
X
-
Did you even try looking at the manual, or did you just start shoving bigger fuses in?
Since you confused a 7.5A for a 75A (which does not exist) I am gonna guess you needn't answer...Comment
-
yeah my bad about the 7.5 thing. i corrected it on e30tech. I greatly appreciate your response though. I just didnt figure there was a section in the manual titled, "If your aftermarket head unit is on but no sound troubleshooting."
Imdashiz- On the contrary to stereoinstaller, I actually do appreciate your post. I finally figured out where the short was on the taillight issue but now the stereo issue still exists. i have pulled the head unit and all the wires seem okay. no frays, everything was connected so im beginning to believe that the issue may be with the head unit itself.Comment
-
not properly grounded?yeah my bad about the 7.5 thing. i corrected it on e30tech. I greatly appreciate your response though. I just didnt figure there was a section in the manual titled, "If your aftermarket head unit is on but no sound troubleshooting."
Imdashiz- On the contrary to stereoinstaller, I actually do appreciate your post. I finally figured out where the short was on the taillight issue but now the stereo issue still exists. i have pulled the head unit and all the wires seem okay. no frays, everything was connected so im beginning to believe that the issue may be with the head unit itself.PSN ID: Yourself1

Comment
-
make sure when you install and connect new components that you check and double check your connections. any wires which are part of the unit NOT being used should be taped off in case by chance touch something. Also check the amp and or speakers too. and if you are drawing way to much amp. you might want to put bigger fuse in.sigpicComment


Comment