Thanks. The coating is actually made by Second Skin Insulation. They call it a viscoelastic sound deadener, 'Spektrum Sludge'. I've used DynaMat before and this works better IMO. Lighter, just as thick but gets better coverage in corners and creases, and has better long term adhesion. I still used DynaMat in a few locations though.
Subwoofer Box Build
Collapse
X
-
-
1988 E30 ALPINA B3 2.7 #224/257 Made in Buchloe
see more : http://www.r3vlimited.com/board/showthread.php?t=71686&referrerid=12460Comment
-
M3s have no ski pass.Brake harder. Go faster. No shit.
massivebrakes.com
http://www.facebook.com/pages/Massiv...78417442267056
Comment
-
Ok Make sense then !
Get your drill and sawzall out !
Pierre1988 E30 ALPINA B3 2.7 #224/257 Made in Buchloe
see more : http://www.r3vlimited.com/board/showthread.php?t=71686&referrerid=12460Comment
-
Actually, M3's do have the skipass panel that can be knocked out. The panel in my '88 M3 was already removed by a previous owner, and before I permanently installed my 10" Luke box in my 325is, I tested it in the M3 and it obviously fits the same. One plus in the M3 is that you don't have to remove any trunk tar to make the box fit properly.Eric Giles
'20 M2 CS
'04 M3
'11 X5 35D
'87 325is
'91 325i Sport
There are few things more expensive than a cheap BMW...Comment
-
Every M3 I have ever seen came with rear battery, which means it has the skipass opening.
These fit the M3 flawlessly, but the rear panel will need to be templated differently...so that would be on you!Comment
-
Luke got my MP ?
Pierre1988 E30 ALPINA B3 2.7 #224/257 Made in Buchloe
see more : http://www.r3vlimited.com/board/showthread.php?t=71686&referrerid=12460Comment
-
OT, kind of. Anyone used Second Skin's damplifier? Not pro... just damplifier. I'm thinking of ordering ~10ft^2 for my vert install. I don't want dynomat as it is expensive and HEAVY.
I still want one of those 10" boxes Luke. The wife loves the 12" box, and I am continually impressed by it's output (and clarity) with only 150w RMS and an RE Audio rex12d4 that only cost $55. What is the max top mounting depth a sub can have in one of those? Any excursion limits?"A good memory for quotes combined with a poor memory for attribution can lead to a false sense of originality."
-----------------------------------------
91 318is Turbo Sold
87 325 Daily driver Sold
06 4.8is X5
06 Mtec X3
05 4.4i X5 Sold
92 325ic Sold & Re-purchased
90 325i Sold
97 328is Sold
01 323ci Sold
92 325i Sold
83 528e Totaled
98 328i Sold
93 325i SoldComment
-
OT, kind of. Anyone used Second Skin's damplifier? Not pro... just damplifier. I'm thinking of ordering ~10ft^2 for my vert install. I don't want dynomat as it is expensive and HEAVY.
I still want one of those 10" boxes Luke. The wife loves the 12" box, and I am continually impressed by it's output (and clarity) with only 150w RMS and an RE Audio rex12d4 that only cost $55. What is the max top mounting depth a sub can have in one of those? Any excursion limits?Comment
-
Quick add: I still need an E34 pan and pickup, maybe a throttle cable too. I need a DME too, like a 413, or whatever I need for an S50, but non-EWS.Comment
-
LeeBrake harder. Go faster. No shit.
massivebrakes.com
http://www.facebook.com/pages/Massiv...78417442267056
Comment
-
M3 are first series of E30, so that may explain why they don't even have the cutout as standard.
Pierre1988 E30 ALPINA B3 2.7 #224/257 Made in Buchloe
see more : http://www.r3vlimited.com/board/showthread.php?t=71686&referrerid=12460Comment
-
Stick to brakes, Lee.Comment
-
Brake harder. Go faster. No shit.
massivebrakes.com
http://www.facebook.com/pages/Massiv...78417442267056
Comment
-
I believe what luke says is that there is the pre-arrangement for the ski-pass, as a spot-welded panel which is easily removable.
Lee, remove your backrest and you will see.
Cheers Pierre1988 E30 ALPINA B3 2.7 #224/257 Made in Buchloe
see more : http://www.r3vlimited.com/board/showthread.php?t=71686&referrerid=12460Comment
Comment