Multi-function clock harness/connector

[FreedS4]

Need a favor from someone who has the multi-function clock in an 89 e30. I spliced in the harness for an analog clock a while back, but would like to go back to the multi-function clock. Would someone mind taking a picture of the harness, at the connector so I've got a visual of where all the wires go to get the MFC working again? Thanks, I appreciate it.

Chris

[FreedS4]

From the top of the connector (the part that looks like a T, where the zip tie is),
Empty Empty
Empty Blue
Empty Brown/Yellow
Empty Empty
Empty Brown/Blue
Grey/Purple Brown/Red

Then I have brown, brown/white, grey/white, and red/white wires left. Which empty spots do they occupy? Thanks

Chris

[FreedS4]

Just need someone to snap a quick picture of the harness. Anyone, a little help?

Chris

[FreedS4]

Anybody?

[jaywood]

I've got a '90 325i. Not sure if it's the same. I can take a pic tomorrow most likely

[FreedS4]

I've got a '90 325i. Not sure if it's the same. I can take a pic tomorrow most likely

I'll be able to tell by where the wires are on your connector. I really appreciate it. I've been trying to get this wired back in for over a week now, but haven't found any good info on wire color and placement yet. Thanks again.

Chris

[FreedS4]

Still looking for someone to take a couple minutes to help me out. Just need you to take a picture of both sides of your harness connector so I can make sure I'm hooking my wires back up correctly. Thanks

Chris

[FreedS4]

Still looking for a little help. It'll only take 1 minute.

Chris

[3toedshewie]

can I help?

I got a 325iC 92 convert, will that be the same?

-nik

[FreedS4]

I got a 325iC 92 convert, will that be the same?

-nik

Maybe, mind snapping a couple quick photos of the harness connector? I'll be able to tell right away if it'll help. I had someone snap photos of a '91 318i harness and the wires were in completely different spots and were different colors, but we'll see. Thanks for your help, regardless.

Chris

[3toedshewie]

no problem, gotta find that connector first, should have a pic weds night

[FreedS4]

no problem, gotta find that connector first, should have a pic weds night

Perfect, thanks again!

Chris

[FreedS4]

Bueller?!?!