Cruise control quit working..?

[randomtask37]

I have once again pulled my dash and i found I had put the blue wire into the wrong spot, but now i am not sure which is the correct one, I am certain it must be one of the 3 spots at the top of the picture touching my index finger. can someone confirm which spot is correct for the little blue wire?

i have also heard you can use any of the top 3 connectors here for the cruse control wire.

ive pulled my cluster 3 times and im not sure which connector i pulled the wire from. each time during reinstallation, i just picked one and things worked.

[Link]

Just simply plugging the little blue wire in the correct spot on the green plug on the backside of the speedometer.

[StereoInstaller1]

Both my '87 325iS and my ex's '89 325i lost cruise. Both were bad modules, the one above the glovebox.

[Simon S]

I fixed it, i went with the top left for anyone who needs this.

Weird. I think this is the first I’ve read of a specific connection of the three needed. Well, cool that it works now.

They are on the same circuit.

This is what I had read too.

For kicks, I grabbed a spare green plug I had:









and here is some girl booty

Both my '87 325iS and my ex's '89 325i lost cruise. Both were bad modules, the one above the glovebox.

Thanks for this input Luke. I pieced together a cc system from yard parts and installed it. Never did work – and after checking the clutch switch engagement, I lost interest not knowing what to check out next.. now knowing that modules can go bad, I can/will try swapping mine out with an extra one I have.

[bastianshaw]

CC such a PITA

[AndrewBird]

This picture is proof any of the 3 plugs will work. You can see how they are all on the same trace.

[StereoInstaller1]

Not having CC such a PITA

Fixed that for ya, bubba!

[bastianshaw]

Fixed that for ya, bubba!

thanks and those asses are kinda gross simon wtf