Announcement

Collapse
No announcement yet.

Lights out?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Lights out?

    I bought a 86 325e a week ago, i replaced almost all the bulbs(most where burnt out). Just yesterday the dash lights stoped lighting up and my whole right side lides on the car? I checked fuses all good and I tried replacing bulbs? So whats that leave me with trying to fix this? Stupid electrical gremlins

    Sent from my SCH-I535 using Tapatalk 2
    sigpic


    #2
    With a respectable digital multimeter start engine and check volts on battery poles. 13.4-14.2V are good but higher...not.Turn Headlights on while engine running. Voltage shouldn't drop over 0.2V. If you get burned bulbs voltage might be too high.Can damage everything. You might need to change the voltage regulator on your alternator. GL
    sigpic
    1990 318is M-technik2

    Comment


      #3
      Originally posted by xtos View Post
      With a respectable digital multimeter start engine and check volts on battery poles. 13.4-14.2V are good but higher...not.Turn Headlights on while engine running. Voltage shouldn't drop over 0.2V. If you get burned bulbs voltage might be too high.Can damage everything. You might need to change the voltage regulator on your alternator. GL
      thanks for the fast response, ill try this! is it possible a loose wire near the head unit that could be loose and cause this cause when i went to put a new head unit in the dash lights went on for a second i left the lights on when doing this accidently but i thought i just accidently hit the dash lights with the positive some how or could something be loose?
      sigpic

      Comment


        #4
        If I remember right the unloader relays may have something to do with this.

        Comment


          #5
          Originally posted by travish325 View Post
          If I remember right the unloader relays may have something to do with this.
          Your saying replacing the relay would maybe fix the problem

          Sent from my SCH-I535 using Tapatalk 2
          sigpic

          Comment


            #6
            Originally posted by e34_spangler View Post
            Your saying replacing the relay would maybe fix the problem

            Sent from my SCH-I535 using Tapatalk 2

            You can try tapping on them or swapping them. Again Im absolutely sure but I remember unloader realys causing something like this.

            Comment


              #7
              Originally posted by travish325 View Post
              You can try tapping on them or swapping them. Again Im absolutely sure but I remember unloader realys causing something like this.
              Ok thanks

              Sent from my SCH-I535 using Tapatalk 2
              sigpic

              Comment


                #8
                Fixed the lights a loose wire was throwinf it out.. umm but the cluster lights only light up on the right side?

                Sent from my SCH-I535 using Tapatalk 2
                sigpic

                Comment

                Working...
                X