Announcement

Collapse
No announcement yet.

OBC issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    OBC issue

    Temp shows 22 degrees but I know its a bad temp sensor. AVG MPH and MPG sit at the same number and it won't change. Should I just buy a new OBC? or is it just sensors?
    1991 Convertible (The BathTub)

    #2
    Have you tried holding "set-res" while on AVE MPH and MPG? Usually if the OBC hasn't been reset and has been reading those outputs for a while, you won't have any fluctuations. It's why I usually reset both of them in between fill-ups.

    Now.. If they read -22, you've got a problem. SI-board working correctly? MPG gauge on your tach working as well? If so, you just need to press and hold "SET-RES". Remember, they read AVERAGES, so the longer you haven't reset them, the longer it takes for readings to fluctuate and actually change

    The -22* is simply the outside temp-sensor. This is easily found in the driver side bumper compartment; usually located on the brake cooling duct on late model cars

    Comment


      #3
      Originally posted by JinormusJ View Post
      Have you tried holding "set-res" while on AVE MPH and MPG? Usually if the OBC hasn't been reset and has been reading those outputs for a while, you won't have any fluctuations. It's why I usually reset both of them in between fill-ups.

      Now.. If they read -22, you've got a problem. SI-board working correctly? MPG gauge on your tach working as well? If so, you just need to press and hold "SET-RES". Remember, they read AVERAGES, so the longer you haven't reset them, the longer it takes for readings to fluctuate and actually change

      The -22* is simply the outside temp-sensor. This is easily found in the driver side bumper compartment; usually located on the brake cooling duct on late model cars
      Holy sheet thanks!
      1991 Convertible (The BathTub)

      Comment


        #4
        Yeah man
        Let me know if that worked for ya

        Comment


          #5
          Originally posted by JinormusJ View Post
          Yeah man
          Let me know if that worked for ya
          Yup everything worked out! Thanks brotha! I just gotta buy a new temp sensor.
          1991 Convertible (The BathTub)

          Comment


            #6
            Here ya go: http://www.r3vlimited.com/board/showthread.php?t=153211
            Originally posted by Matt-B
            hey does anyone know anyone who gets upset and makes electronics?

            Comment


              #7
              Originally posted by george graves View Post
              just purchased one. Thanks!
              1991 Convertible (The BathTub)

              Comment

              Working...
              X