I just swapped out wiring harnesses for my m52 in my e30 after having issues with my first one. Just pulled it out of the garage today to find out I can't roll my windows down or my sun roof. Went to just blow air through my vents and no power there either. But my clock, radio and everything on my dash works fine. Tried to check the powers and grounds but couldn't find anything irregular. Any suggestions??
-
If you're not going to do it right, please don't take it out on your car! -
Check your starter wiring. I had the top wire break at the connector"I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj
85 323i M TECH 1 S52 - ALPINEWEISS/SCHWARZE
88 M3 - LACHSSILBER/SCHWARZE
89 M3 - ALPINEWEISS II/M TECH CLOTH-ALCANTARA
91 M TECHNIC CABRIO TURBO - MACAOBLAU/M TECH CLOTH-LEATHER
-
That sounds like the unloader relays aren't engaging. Which would mean that the unloader control wire from the engine harness isn't connected the unloader switch in the starter solenoid or that the unloader switch is bad.The car makes it possible, but the driver makes it happen.
Jim Levie, Huntsville, ALComment
-
Which ones the unloader switch?If you're not going to do it right, please don't take it out on your car!Comment
Comment