I bought this unit from eBay for my 92 325ic.
Universal-Car-Vehicle-Keyless-Entry-System-w-2-Remote-Controller-LED-indicator
I was about to start wiring it, removed the kickpanel and started researching information. I think I got this mostly figure it out, but want to make sure I am not missing anything.
I have read quite a bit of the information from this thread The E30 Aftermarket Alarm Installation Writeup. It leads me to believe the unit I bought is not everything I will need.
I do not want any alarm features or extra LED's in the car. I really only want the following to work:
1. Keyless entry
2. Horn beep on unlock / lock
3. Lights flash on unlock/ lock
4. dome light turn on with unlock / lock
5. retain accessory power until door is open (very low priority)
I think I need to purchase some relays to get the horn and dome light working. How do I determine if i have the delayed entry model incase I decide to use that for the dome? I suppose I'll do a couple diodes for the parking lights? Or is that completely unnecessary with two separate wires? Also can someone confirm if the white "ACC" wire is for switched power?
I imagine my unit will my unit work for all this? I am planning to sketch a lot of this out in the next day or so. I don't mind purchasing a different box if this thing is a piece of junk and I would be better off with something else...
The main unit works like so:
The central locking portion is this. I believe I should be using use the top right:
Lastly here is the operations manual diagram:
Universal-Car-Vehicle-Keyless-Entry-System-w-2-Remote-Controller-LED-indicator
I was about to start wiring it, removed the kickpanel and started researching information. I think I got this mostly figure it out, but want to make sure I am not missing anything.
I have read quite a bit of the information from this thread The E30 Aftermarket Alarm Installation Writeup. It leads me to believe the unit I bought is not everything I will need.
I do not want any alarm features or extra LED's in the car. I really only want the following to work:
1. Keyless entry
2. Horn beep on unlock / lock
3. Lights flash on unlock/ lock
4. dome light turn on with unlock / lock
5. retain accessory power until door is open (very low priority)
I think I need to purchase some relays to get the horn and dome light working. How do I determine if i have the delayed entry model incase I decide to use that for the dome? I suppose I'll do a couple diodes for the parking lights? Or is that completely unnecessary with two separate wires? Also can someone confirm if the white "ACC" wire is for switched power?
I imagine my unit will my unit work for all this? I am planning to sketch a lot of this out in the next day or so. I don't mind purchasing a different box if this thing is a piece of junk and I would be better off with something else...
The main unit works like so:
The central locking portion is this. I believe I should be using use the top right:
Lastly here is the operations manual diagram:
Comment