Looking for an generic wire option; headlights

[pilot_anderson]

Trying to build new plug and play harnesses for sealed beams to euro lights

Part numbers would be;
White Connector; 61-13-1-378-417
Grey Connector; 61-13-1-378-418
Yellow Connector; 61-13-1-378-419


Circular Connector 1.0-2.5 MM²; 61-13-0-007-446
(This is the bigger wire & recommended)
Circular Connector 0.5-1.0 MM ²; 61 –13-0-007-445
(This is the smaller wire)

I am curious about what I can do for the circular connectors above; They are very expensive OEM. About $7 a piece. At 6 wires a headlight (2 high beam, 2 low, 2 city) that would come to $42 just for wire. Thats a bit much... Is there a replacement? I feel like there has to be a cheap generic equivalent. If this needs to be moved to lighting area let me know.

Thanks for the help.

[Kershaw]

you can always hunt for the connectors at the junkyard. Those circular connectors might be the same as the obc temp sensor connector.

I went to a junkyard and found the right connectors for my depos, I think they use the same euro connector. Took the plugs off e36s, windshield washer fluid and fog lights maybe? I'm not sure if I recall that correctly. Didn't wire in my city lights though.

[glnr13]

i did the same as what kershaw said. Most of the connectors for lights can be disassembled to leave just the circular connectors. I pulled from e32s and e36s

[AndrewBird]

E34s also use these connectors. I've been meaning to pull a handful of them when I go to the junkyard just to have and never remember.